How To Fix Usb 3.0 Not Working On My Windows 10 Pc {fixed}

How to Fix Usb 3.0 not working on my Windows 10 PC {Fixed}

General

Facing problems with USB 3.0 drives is one of the common situations that Windows users come across every now and then. USB 3.0, not working issues can spring out of many common grounds including outdated drivers, cables, and unadjusted settings issues. This article explains the best ways to troubleshoot USB 3.0 detection error or any performance issue quickly on your Windows PC.

Methods to Fix USB 3.0 Not Working On Windows 10 PC

Here are the best methods to fix the problems you are facing with a USB 3.0 drive on your Windows computer. Let’s roll down to each one and see what turns out to be the best solution.

  1. Check Cables

The primary step to take when you face USB 3.0 drive issues is to check if the cables are in dysfunctional condition. This may be a cause behind drive issues in your Windows 10 computer to fix which you can replace the cables if you spot them broken. Hopefully, this will resolve your issue quickly.

  1. Update Drivers

If your USB 3.0 port dysfunctional then perhaps you need to ensure the driver updates. An updated driver is a must for unbothered performance and safeguarding the process against poor functionality, lagging, and other issues. You must update the USB 3.0 driver to resolve the glitch. The primary steps to do that are here:

  • Take yourself to the Device Manager.
  • Now, right-click the name of the device and choose the Update Driver Software option.
  • Hit the Search automatically for an updated driver software option and wait while Windows scans for a new driver for your device.
  • If it shows any new driver available, that will be updated automatically.

This is not it. You can navigate yourself to your PC manufacturer’s official website and look for the USB drivers there. You must know your PC model name and understated its compatibility with USB drivers. Make sure you only seek an official website for a convenient installation of drivers.

Apart from using Device Manager and seeking a PC manufacturer’s website to download and update USB drivers, you can also fetch yourself a good third-party driver updater software. In some cases, Windows updates don’t fit the successful run and they consume a great deal of time as well. To skip that hassle, you can use a trusted driver updater software that will recognize what kind of a driver your system requires and it will quickly install the updates for you.

  1. Run Hardware Troubleshooting

If you have covered the steps to install driver updates and the USB 3.0 issue is still persisting around then you can troubleshoot this issue using the Hardware and Devices troubleshooter.

If you using Windows 10 operating system then you must follow these steps:

  • Navigate yourself to the Settings section.
  • Click the Update & Security option and hit Troubleshoot.
  • Now, find and run the troubleshooter.

Once done, you can restart your PC and see if your issues are resolved now.

  1. Check BIOS

If you are facing the USB 3.0 issues in your Windows computer then here’s another way out to buzz the trouble off. Checking on BIOS is one of the best solutions, as some users have experienced it, to resolve the USB 3.0 drive not working problem.  All you have to do is simply disconnect your drive and enter BIOS. Then, reconnect your drive again. Once that’s done, exit the BIOS and restart your Windows PC. Now you can see if that makes any difference.

  1. Get the USB selective suspend setting disabled

If the USB 3.0 drive issue still isn’t leaving your Windows PC then you can take a hand from the USB selective suspend setting and resolve the issue. Here’s what you can do:

(Note: Make sure you follow the steps carefully and as they’re given. Above all, remember to have a restore point to avoid any loss before you begin to change your power settings.)

  • Stop by the search bar and type power management.
  • Now open the Power & Sleep settings and go to the Additional power settings.
  • Then, click the Change plan settings that rests next to your preferred power plan.
  • Take yourself to the Change advanced power settings section.
  • In the next step, you have to spot the USB selective suspend setting under USB settings. Once you find it, set it to the Disable option.
  • Then, click Apply and hit the OK button to commence changes.

Once you have applied the changes, restart your Windows PC and see if the USB 3.0 drive problem has vanished.

Summary

You just scrolled through the best ways to eliminate USB 3.0 drive issues on your Windows 10 computer. USB issues do make a surprise popup and the methods mentioned above are universally best to effectively get yourself rid of this problem. If you know more about the solutions to this glitch, share with us in the comment section.

 

Leave a Reply

Your email address will not be published. Required fields are marked *